question

mivester avatar image
mivester asked

Changing Float voltage on Quattro 48 3K

I am trying to use some PSI lithium batteries with a Quattro 3K 48VDC inverter. However I am getting an error where the batteries want 54V for the float charge, and the Quattro is putting out 55.2V. Is there a way to adjust this voltage output in the Quattro? I have it hooked up through a Cerbo GX to view the settings, but I did not see a way to adjust.

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Mivester

Ideally you would want an mk3 to usb adaptor and victron connect on a laptop or phone.

But you can also remote configure it over the vrm if your cerbo is linked up.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mivester avatar image
mivester answered ·

Thank you. I had some digging to do to find where the option to enable everything was, adn get the programs downloaded. I have it working now.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.