question

Meine_Energiewende avatar image
Meine_Energiewende asked

Remove PV Inverter from Venus Webinterface

Hi Community,

i have exchanged a Fronius PV Inverter (Symo) with an other Type (Primo).

I used the exact same IP address on the datamanager. Now i have 2 of the same inverters in the webinterface. On is disconnected (yes ... i know :)).

Is there any possibility to totaly remove a PV Inverter from the venus ? (maybe by ssh ?) I've tried to make it invisible but this is not working too.

Thanks a lot.

Jens

PS: Some screenshots:

Fronius
venus-1.png (39.9 KiB)
venus-2.png (23.7 KiB)
venus-3.png (20.2 KiB)
venus-2.png (23.3 KiB)
venus-3.png (20.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Rebooting the GX device should take care of that? Have you tried that already?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Meine_Energiewende avatar image Meine_Energiewende commented ·

I did the reboot yesterday evening. The Inverter on the summery-screen disappeared. But it is listed on the Inverter Page.

-> For me this is ok ..... but shouldn't there be a possibility to totally remove it ? (like remove device on the VRM Page ?)

Thanks for your answer anyways.

Jens

0 Likes 0 ·
jdippel avatar image
jdippel answered ·

Any solution to totally removing it yet?

Greetings

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.