Hi all,
i want to design a system as close to zero return as possible using multiplus II 48/3000 GX and 10KWh battery.
my house is single phase 35Amp fuse.
my largest load is an induction hob at about 7KW, sometimes together with an oven (3KW) and some other small loads.
effectively potential loads much larger than 5KW peak load for this inverter.
is there a way to limit the peak load and can i use 20/25Amp breaker in C-characteristic (slow), i'm not comfortable using 32Amp breaker on 35Amp main fuse.
another challenge i have to solve is the inverter will be in the attic, far away from the main breakerbox, limiting maximum current would save me the trouble replacing wires to the attic.
thanx for any advice/reply.
yuri