question

simran707 avatar image
simran707 asked

VE.Direct Bluetooth Smart Dongle with on/off-switch

Hello!

I would like to connect a simple on / off switch to the cable of the dongle in order to be able to switch off the Bluetooth signal. Is it that easy? Which cable? The Red one? Or both, electricity and ground?

Thanks in advance...

VE.Direct Bluetooth Smart Dongle
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hello @simran707

The pinout of the connector can be found in the "VE.Direct Protocol" document that can be downloaded from here: https://www.victronenergy.com/support-and-downloads/technical-information

To turn off the bluetooth dongle, switching the Power+ should be enough.

Kind regards,

Thiemo van Engelen

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic