Hi, I was browsing through the Victron Battery compatibility page ( https://www.victronenergy.com/live/battery_compatibility:start ) and found this nice guide below, detailling the parameter settings for pytes batteries (see link below). I’m wondering if anyone has created a similar guide for Felici…

Jippie it works ! Today a second USB-CAN-Adapter (DSD TECH SH-C30G) arrived. I plugged one side of the cable (RJ45) into the PCS port of the battery. I connected the open ends CANL and CANH to the USB-CAN-Adapter and the USB Side into the RPI running Venus OS and the Battery was recogniced as Pylon…

Hi again, glad to hear that it worked. Just to add: The battery is pretty new. BMS version is V519. And: In case anyone figures out, how to display more details from the BMS (incl cell voltages & temperatures) in Cerbo or VenusOS, pls share. Alternatively: if anyone has the CAN protocol specific…

Hi Angie, I actually, started the thread with a different intention. Not for communication issues, but for the battery setting in Victron. In the mean time I have received a pdf from your support colleague (Daniel-Lei) via e-mail. Am i allowed to share this here? Thanks oliver

Hi Oliver, well temperature is being shown but not for all four temperature sensors. But I guess that is not what you are after, right ? BTW I do have BMS version V519 too. [image]

hello，sure you can share it here，We have no problem with that as long as it helps our customers. But please note that that document only applies to our low voltage batteries :blush:

Hi, I’m not sure I understand your question correctly - I think this battery data is uploaded from the BMS to the inverter! :grinning:

Hi @Angie-Felicity The questions were: Is the battery BMS supplying this data about min/max cell voltages? What about min/max cell temperatures? Because if the BMS is not supplying this data, neither the Cerbo and later the inverter will receive it. This data is broadcasted by the battery on CA…

[image] Multiplus II settings for Felicity LUX-E-48100LG04 (or similar) Q&A and troubleshooting Hi @Angie-Felicity The questions were: Is the battery BMS supplying this data about min/max cell voltages? What about min/max cell temperatures? Because if the BMS is not su…

hello，yes only use RS485 to communicate our battery with inverter，there will be info about MAX MIN cell voltage and temperature

Multiplus II settings for Felicity LUX-E-48100LG04 (or similar)

Q&A and troubleshooting

Angie-Felicity 11 December 2024 06:39 27

if you use FelicityESS LV battery，you can refer to this file for setting
Felicityess with Victron Energy Inverter Setting.pdf (654.2 KB)

Communication between Cerbo GX & Felicity LiFePo battery

BMS High Voltage

Topic		Replies	Views
Victron Multiplus / Dyness B4850 / Akku Kapazitätsprobleme Deutschsprachiger Bereich parallel , cerbo_gx	58	848	4 March 2026
Multiplus2 5000 /70 3Phase mit 200kwp Netzparaell Deutschsprachiger Bereich felicity-solar	75	863	22 May 2025
48V or 51.2V LiFePO4 DIY diy , domestic , multiplus-ii	23	1399	7 June 2025
Victron Multiplus 2 + Pylontech us5000 Deutschsprachiger Bereich vrm	41	2591	16 September 2025
Communication between Cerbo GX & Felicity LiFePo battery Q&A and troubleshooting beginner , offgrid , multiplus-ii , cerbo_gx , felicity-solar , multi-rs	1	628	15 April 2025

Multiplus II settings for Felicity LUX-E-48100LG04 (or similar)

Related topics