markde avatar image
markde asked

Multiplus-II cuts off at 40.6 Volt (too early)

Hello, I'm new to the forum and have already read some posts but haven't found a solution to my problem yet.

Here it is:

I am using a Multiplus-II 3000 in ESS mode. I connected 2 Tesla Model X battery modules. Overall, it is a 12S system. (50.4 volts - 36 volts) I want to shut down at 37.2 volts while discharging (I understand this is the lowest possible setting) but my system starts reducing the discharge current as it approaches 40.6 volts. I tried with the "shut-down on SOC" option and without - nothing works.

thanks in advance!




ESSdischarge level
1622196445923.png (64.5 KiB)
1622196553825.png (30.9 KiB)
1622196592631.png (5.1 KiB)
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

There is plenty of Tesla battery content on the forum, Please avail yourself of the search function..

0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic

What is ESS training video

ESS Quick Installation Guide

ESS design and installation manual