Can I control several devices with the Smart BMS CL 12/100 with the "Charge Disconnect" and "Load Disconnect" plugs? In the manual there are several examples but only with one device. But I need:
"Charge Disconnect" = 2x SmartSolar MPPTs, 1x Multiplus 800VA
"Loade Disconnect" = 1x Smart Battery Protect, 1x Multiplus 800VA
Here are the instructions: https://www.victronenergy.com/upload/documents/Manual-Smart-BMS-CL-12-100-detailed-EN-NL-FR-DE-SV.pdf
Thank you very much for a short feedback
Many thanks Gabriel
