question

njordan avatar image
njordan asked

Pylontech Remote Console - Details missing (?)

I finally bought/received my VenusGX, Multiplus II, 2xUS2000 hardware. Did build it up and now already balancing arround 0W during night hours....so highly pleased.


BUT - i do not see any details about the Battery in the remote console, Any Idea what i did wrong, or why i cannot see anything more.....what would be highly interesting to see :-)




Pylontech
1593902187928.png (21.1 KiB)
1593902207132.png (19.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Sending those details on the CAN-bus to be read by the GX device is not yet supported by the Pylontech.

There is a note in the Pylontech + Victron manual to reflect this.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

njordan avatar image
njordan answered ·

OK thanks.

but is there a way to find out if the installed cluster really works as it should and has the full capacity working all together.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.