question

dave-langsdale avatar image
dave-langsdale asked

I have 5 115v victron 110ah agm deepcycle batteries connected to a victron multiplus mppt 150/35. What battery capacity should the multiplus be set at and also charge and discharge voltages please advise thank you

battery capacity
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@dave langsdale

The details of the charge and discharge voltages are printed on the sides of the batteries. Also set your charge current to the recommended Amps stated on the side of the battery.

As for your capacity, I am assuming you have a 12v system as you have five batteries. Is this correct?

If it is a 12v system then you have 550ah (5x110ah) capacity.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic