on Pylontech Page is written, that only Shared Voltage Sense (SVS) has to be turned off. (https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom#venus-device_settings)
On Color GX Page SVS and STS has to be off. (https://www.victronenergy.com/live/ccgx:start#introduction_and_features)
If i disable STS, the Multiplus will get the wrong battery temperature. This can be shown via Modbus or VRM. If i enable STS, the Multiplus shows the same Temperate as Pylontech BMS is reporting.
Now i have set it like this:
What is the correct STS setting?
Thanks a lot!