New Mopeka tank top sensor

Question

question

harold asked Jul 18, '23

New Mopeka tank top sensor

Somebody tries these already?

mopeka sensors

1689681397640.png (585.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2023-07-27T14:53:51Z

mvader (Victron Energy) answered · Jul 27, 2023 at 02:53 PM

Hi @Harold thanks for asking. We checked with Mopeka, and answer is that we don't support them yet.

Mopeka already shared all the necessary details with us, next will be finding some time on our side to make the necessary changes to the source code. Might take a while - few months at least I expect.

Is there anything you like in these that is not available in the already supported models?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-08-02T09:39:20Z

harold answered · Aug 02, 2023 at 09:39 AM

Hello Matthijs, @mvader (Victron Energy)

Thanks,

As it is a top sensor, it might be used for (keel) tanks, with uneven shapes.

So a way to program some sort of volume / height profile would be great!

Harold

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb ♦♦ commented · Sep 07, 2023 at 03:43 PM

The other sensors are limited to the size and position of the tank.

The TD40 is perfect for our local market where we use large, freestanding tanks where a the only option is a top-down sensor.

2 ·

Answer 3 · 2024-01-23T14:46:22Z

egbert answered · Jan 23 at 02:46 PM

hi

the mopeka TD40 works with firmware 1.13-3

the only thing is

Mopeka TD40 EMPTY VALUE

Mopeka TD40

sensor value when empty only goes to 150 cm

My tank height when empty is 221 cm

victron-mopeka.jpg (185.6 KiB)

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pwfarnell commented · Jan 24 at 09:55 AM

suggest you post this in the Firmware V3.14-3 thread so that it gets picked up.

https://community.victronenergy.com/questions/256461/v3142-available-for-testing.html

0 ·

question