VE.Bus Error 11 Not sure if there is an error.

Question

question

mryoshii asked Dec 18, '22

VE.Bus Error 11 Not sure if there is an error.

L1 and N were swapped during the installation. However, this has been fixed. Nevertheless, this is displayed. Everything seems to work with the MP2. Is this an error log or is this an actual error?

ESS vebus error 11

1671396544937.png (23.0 KiB)

1671396577737.png (15.7 KiB)

1671396590964.png (15.8 KiB)

1671396602976.png (18.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2022-12-19T06:51:44Z

Guy Stewart (Victron Community Manager) answered · Dec 19, 2022 at 06:51 AM

Hi @MrYoshii,

That is indeed a log of the last error.

The user interface isn't the clearest with that, but there is no doubt when the alarm is active - the unit will not work and the there will be active (and likely audible alarms) in the notifications screen of the GX device and on VRM.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mryoshii commented · Dec 19, 2022 at 08:01 AM

ahh ok thanks for the info. Is it possible to clean this log?

0 ·

question