question

elliot330 avatar image
elliot330 asked

Can I extend the CT clamp wiring

My installation of the MP is some distance away from the incoming supply and being a grid parallel ESS installation I need to install the CT clamp in the incoming supply I have a cat 5 cable installed between the two locations, can I extend the wiring on the CT clamp?

ct
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@elliot330

This has been discussed a few times. With mixed success.

See linked post.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

elliot330 avatar image elliot330 commented ·
thank you for the link.



0 Likes 0 ·
elliot330 avatar image
elliot330 answered ·

after lots of research it looks like Victron found a solution - 20m cable here CTR110002050


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic