How and where do I publish the keepalive to ?

Question

question

northstar asked May 11, '22

How and where do I publish the keepalive to ?

Hi all,

I´m successfully connected but don´t see any topics.
How and where to do I publish the keepalive in MQTT-Explorer ?

Thanks,

Sven

MQTT

19-mqtt-explorer-connected.jpg (51.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2022-05-11T10:19:11Z

northstar answered · May 11, 2022 at 10:19 AM

I already tried with the VRM portal webpage open (it supposed to send keepalives to the cerbo) but still no change, mmh. I don´t get that dropdown little triangle as with test.mosquitto.org, like below.

20-mqtt-explorer-connected-test-mosquitto.jpg (60.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-05-31T09:24:24Z

pierrehassolar answered · May 31, 2022 at 09:24 AM

Subscribe to # also

Then send message to online VRM id, one of the id's will be your local.

R/ID/keepalive

R/f045ea7bkb78/keepalive with no values

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2022-06-01T08:07:06Z

northstar answered · Jun 01, 2022 at 08:07 AM

Thanks Pierre,

this is fine now !

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question