Set AcPowerSetpoint , MultiPlus using MQTT

Question

question

nir-fsight asked May 6, '19

Hi,

I would like to set the value of AcPowerSetPoint using MQTT.

in the documentation, i see example of it using the following:

W/e0ff50a097c0/vebus/257/Hub4/L1/AcPowerSetpoint

However, I don't see any topic containing the "Hub4" nor I get any response for the command.

Is the Hub4 still valid?

Whet am I doing wrong?

thanks

Nir

MQTT

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-03-05T20:55:44Z

neo answered · Mar 05, 2020 at 08:55 PM

I think there is an error as the path should be in sync with the parameter of the topic you want to update.

I believe the correct path should be W/e0ff50a097c0/hub4/0/AcPowerSetpoint and not W/e0ff50a097c0/vebus/257/Hub4/L1/AcPowerSetpoint

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.