how to connect fenecon basttery with bms to victron inverter

Question

question

cristy asked Mar 20, '24

how to connect fenecon basttery with bms to victron inverter

i have 4 battery fenecon 48 v lifepo4 with bms and i need to connect this to a victron inverter

what i will need and how to configure

48v battery

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2024-03-20T07:18:42Z

Paul B answered · Mar 20 at 07:18 AM

First of all contact the battery manufacturer and see if the BMS is compatible and they should have the instructions

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-03-20T07:27:49Z

cristy answered · Mar 20 at 07:27 AM

battery manufacturer have their own fems for comunication with bms and their inverter and the cost is much higher than using a victron inverter

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-03-20T07:36:18Z

nickdb answered · Mar 20 at 07:36 AM

For unsupported batteries you need to speak to the battery manufacturer about how to do this. If they advise against it, choose something else that is compatible.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question