question

marcve avatar image
marcve asked

Phoenix Smart IP43 relay specifications

I would like to control an external 220 volt ac relay with the build-in relay in the Phoenix smart IP43 charger, but the manual states the relais can switch 5 Amp to 28 Volts DC. The coil on the external 220 volt relay does only consume 40 mA / 220 volt. Is the internal relay able to handle this ?

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

I think not. You need to find a relay that works with the Phoenix parameters in the input side and can switch your AC load.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic