Victron cant allow autoconsumption

[Pierun]

Hello i have very frustrating problem
Instalation
3x MPII 48V 5000VA.
Cerbo GX
Fronius 8,2
MPPT 450/100 Victron

Battery
4x Pylon 2,4
2x Turbo 2,4

Now it charge batteries to 100% and keep then at this range.
When is no Sun it discharge very slowly like 10-15% of consumption.

When i set Inverting mode then everything work correct.

Changed BMS to shunt to exclude Bms problem. And there is no difference.
Disconnected TurboEnergy and left only Pylon and is the same… whe i left only Turbo is same problem.
Ess on or off, dess also… changed everything. I think.

No autoconsumption when sun is lack.
Looks like energy is only for Victron itself.

Every hint is welcome. Whats is wrong and why.

[ejrossouw]

What are your ess settings?

[Pierun]

Ess, is enabled and optimized with battery life, tried without life battery too. No effect.
It says self consumption is active. But no consumption.

Whe battery is near 100% at floating it discharge and charge without problem.

But to consumption is imposible expext Inverting Mode.

[ejrossouw]

Are all your loads on ACOUT? Is the Fronius on the input or output side?

[Pierun]

yes, victron is right behind security, so all load and fronius is on AC out