Good morning There is a new series going into public testing: v3.60~x. Change log below, first please make yourself aware with the beta testing instructions: Instructions 1 of 3: Venus OS beta testing & how to join/install In case you don’t know what this message is about, please start with readi…

On V3.60~60 Central detail of brief page isn’t showing anything. [Screenshot_2025-04-18-15-20-54-71_40deb401b9ffe8e1df2f1cc5ba480b12] [Screenshot_2025-04-18-15-21-08-94_40deb401b9ffe8e1df2f1cc5ba480b12]

It’s been that way. Drop the 4th item and the center info will appear.

with ~60 VM-3P75CT as AC Load became unavailable in node-red. Reverted back to ~59 and it’s working again. VM-3P75CT firmware v1.08 HW version 2. [Screenshot 2025-04-18 at 20.13.44]

[image] Matthijs Vader: v3.60~60 Venus OS Large Victron Node-RED pallette, node-red-contrib-victron v1.6.23 & v1.6.24 Virtual switch: improve naming Extra examples Am I correct when I assume you mean Virtual device instead of Virtual switch ? The examples are on the Wiki page I presume…

Same here. All 3 meters, Grid, PV1 and PV2 were not detected. Had to downgrade back to ~59.

[image] Bart Champagne: Am I correct when I assume you mean Virtual device instead of Virtual switch ? The examples are on the Wiki page I presume ? No I really mean Virtual switch. Its a new node, not too useful yet I think as its intended for a new feature coming soon in gui-v2. Wrt the e…

No connection to Grid meter Victron-VM-3P75CT- by Modbus TCP/UDP

It’s been reported a few times, please check the relevant threads mentioned above.

If the BMS calls for say 15A charge current and there is a DC load of 10A. What I see is that even though the multiplus is set to a max output of 50A, 5A will go into the battery and 10A will be used. I expected the multiplus to output 25A(15A Battery, 10A load). This happens during bulk charging…

Venus OS v3.60~60 available for public testing

Beta testing Venus OS beta testing

lxonline (LX) Split this topic 19 April 2025 07:14 138

2 posts were split to a new topic: No grid values show in guiv2

Topic		Replies	Views
Venus OS 3.6 and dbus-serialbattery or other mods Deutschsprachiger Bereich firmware_update	36	2647	21 March 2026
Multiplus II 24/3000 nicht mehr steuerbar/sichtbar Deutschsprachiger Bereich victronconnect , ess , vrm , mk3-usb , multiplus-ii , mk3	56	519	16 April 2025
ESS not working correctly in V3.70 when peakshaving Q&A and troubleshooting ess , multiplus_2_gx	40	937	1 April 2026
Venus OS v3.70 release version - After reboot "low battery voltage" alarm Q&A and troubleshooting	15	406	20 March 2026
V3.64 Node-RED - Not connected to D-Bus error Node-RED diy , domestic , node-red , gx_device , cerbo-gx	48	1124	24 October 2025

Venus OS v3.60~60 available for public testing

Related topics