GX Touch 70 on an extension does not work with 3.70 update. My display is in another room and I am using a 25 Ft 22 AWG USB 3 extension and 25 Ft Monoprice 4K Certified Premium High Speed HDMI Cable - 4K60Hz, 18Gbps, HDR. OS 3.70 is working properly in Remote Console (RC). System has been up with…

Best you rollback while the broader kinks are addressed.

I am having a similar problem with an HDMI monitor connected to the Cerbo GX (first version, not mk2) via HDMI. It worked perfectly for years and in 3.70 the display freezes. After Cerbo restart, the hdmi monitor works for a few seconds and then it freezes again. The hdmi cable is a quality one, an…

We will look in to this. But I don’t have a logical explanation for this at the moment.

Hi @RobP , Can you check whether eliminating some load on the Cerbo resolves the issue? Disconnect some devices, stop node-red/signalk (if installed and running) and set the backlight to the lowest option possible. Furthermore, if you’re ok with it, we’d like login to your system remotely to have a…

Venus 3.70 Touch display issue with extension cables (possible issue?)

Q&A and troubleshooting

jeroen (Jeroen) 1 April 2026 06:38 6

Updating to v3.72 should fix this, see [Bug] New GUI v2 - AC Load (ET112 via RS485) watt value freezes after ~15 minutes

Topic		Replies	Views
Cerbo GX with GX 70 touch screen issues DIY expert , display , victron_community , cerbo-gx	12	1407	18 October 2025
GX Touch 50/70 Display for Cerbo GX - cable extension Q&A and troubleshooting diy , display , victron_community , cerbo-gx	9	4095	27 October 2025
GX 70 unresponsive DIY beginner , rv	11	497	27 July 2025
Powered/Active HDMI for Cerbo to GX Touch Q&A and troubleshooting professional , gx_device , cerbo-gx	5	186	25 November 2025
Powering Cerbo GX Display DIY beginner , rv , gx_device , cerbo-gx	2	297	10 July 2025

Venus 3.70 Touch display issue with extension cables (possible issue?)

Related topics