My boats Cerbo GX is connected to my Teltonika RUT X11 router by ethernet cable. The connection has worked without fail for >3 years. I upgraded from 3.50~7 to ~15 on 1st September. Changed remote console etc access to password secured. Over the next 2 days I lost ethernet connection 3 times, the Cerbo stated “unplugged”. Rebooting regained the connection but it needs to be reliable so I changed back to ~7 on the 3rd Sep. Now on the 5th and I have had no further problems with ethernet connection to my router.
Hey @pwfarnell , can you try that a bit more?
It almost has to be a strange coincidence.
@mpvader I have updated to ~18, see how it goes for a few days and update the topic.
Great - thank you
Installed ~20 3 days ago and updated router firmware and has been fine since so take this as solved for whatever reason. I have not touched the hardware as it seemed a firmware issue. When the Cerbo lost ethernet it did not fail over to WiFi and a Cerbo reboot reconnected so it seemed like a Cerbo issue.
Ok thanks for the feedback and closing!