Solved: Multiple SolarEdge PV output not summed in overview

[zonnigBreda]

In my system with 2x solarEdge seems in the overview the 2nd solarEdge is not visible in the ’ Solar Yield’ number.

The 3phase SolarEdge is producing 2041W, the second 1phase SolarEdge on L2 produces 1400W.
Note: This also distorts the AC load number in the screen (It shows 0 as I guess it can’t go negative on L2)

The solarEdge inverters are connected with modbusTCP and show the right number in the devices view. The error is consistent in all the UI’s

Any suggestion to get the total PV to show right?

[zonnigBreda]

After posting in the related posts this came up:

Incorrect Grid sum value on dashboard, but correct on Remote Console

The AC-Input of L1 is “way off”. The Solaredge is reporting 2169 Watts The Inverter on L1 is measuring 1368 Watts. And that is about the difference of -785, as my thought outlines. So, what I see, that your system also says “0” Consumption on L1. A wonderful 0 is very suspicious, that indicates that a “negative” consumption is calculated, and therefore displayed as 0. From the Data - and the assumed connection paths - The system should conclude: 2169 Solar, 1368 into the multi and 6W to gri…

Seems that in my recent reconfiguring the 'Position was changed from Input 1 to input 2.
Once that was set correctly back, the calculation numbers are fixed