1. Introduction This procedure and software will turn an Android tablet/phone into a dedicated display for GX products. The app, once installed, takes over the device, running in kiosk mode to ensure it functions as a dedicated display for GX devices. This means: The tablet will only serve as a GX…

Well fitted! This is what I had in mind when started working on this project. Could you please let me know the phone brand/model? When installing via the QR code, the app can do some extra things like block notifications and other functions for the best experience. Having this in mind, you shouldn…

[image] jperez: Could you please let me know the phone brand/model? It’s a Xiaomi Redmi note 10 pro running on Android 13. Screen is 6,7 inches. It has an amoled @120hz screen that is perfect for the GUI 2.0 dark theme since there is no glow in the black part of the screen and no variations…

Hi! Went out and purchased a cheap Samsung Galaxy A7 Lite tablet and firmware updated it all the way to One UI 6.1. Factory reset it afterwards and follow the instructions in this thread. Works like a charm to run the QR code, but when everything is done I come to the Setup Wizard and when selecti…

The app uses mDNS to find the GX, so being on two different VLANs could be the issue. Adding an option to manually set the IP of the Cerbo is on the to-do list. As a workaround, if possible, you can temporarily connect the tablet to the same VLAN as the Cerbo, select the GX in the devices menu, and …

Works great on a old Sony Xperia phone running Android version 8. Successfully installed the app using the QR code.

GODSEND! Works flawlessly on samsung S10 and the setup was a breeze… I’m impressed! Will 3dprint an holder for it and fix it to a wall connected to my pc for charge. Awesome!

Update: I think this (Purple Line) is the Top Status Bar. You can Hide it but given the device is now in Kiosk Mode I can’t open those settings. Maybe a new version of the app can allow you to hide all notification bars, etc

Hi everyone, A new version has been released: v1.00beta2 Changes: Fix a bug that causes the top status bar to keep appearing. Enable the option to connect to the GX by manually entering the IP address. To update, reset to factory defaults by using the option in the service menu and install the …

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Beta testing Venus OS beta testing

mmaritz (Mark Maritz) 25 October 2024 05:07 24

I have but no luck. They don’t appear after restart. Just after the menu has been used a few times.

Topic		Replies	Views
Show us your Android GX WI-FI display installed Show us your system cerbo_gx , android-gx-display	31	3732	26 July 2026
Which Android tablet or phone should I use for the wifi GX display feature? Q&A and troubleshooting cerbo_gx , android-gx-display	20	2199	25 March 2026
Display Off Time non-Victron touch screen DIY diy , gx_device , victron_community , cerbo_gx	7	1176	6 May 2025
App Victron Connect not working / Victron Connect App funktioniert nicht Q&A and troubleshooting victronconnect , diy , vrm , multiplus-ii	41	643	14 October 2025
Android GX Display keeps rebooting DIY diy , display , android-gx-display	4	217	16 July 2026

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Related topics