Multiplus II GX hält sich nicht an Ladestrom-Limit

[astirfreak]

Falls es noch jemanden interessiert. Ich habe die Frage mal im englischen Forum gestellt:

Multiplus II GX does not adhere to charging current limit

I checked the data again: [grafik] It seems that a few minutes after the BMS-current exceeds maxChargeCurrent, the MPPTs left the MPP of around 100V. The voltage them rose to higher values. Maybe they reduced their current but because of an unknown reason, the Victron system regulated the current with a constant offset on maxChargeCurrent of about 2 to 3Amps. Here the raw data from influxDB without aggregation: [grafik] So the charge current limit seems to work in general, but with an off…

Dabei ist mir aufgefallen, dass die Ladestrombegrenzung sehr wohl wirkt, jedoch einen Offsetfehler von 2-3A hat.