While I am no professional, this is my third system and has me stumped. Components: Cerbo GX SmartShunt Pair of SmartSolar controllers MultiPlus-II 12/3000/120 Renogy drop-in batteries, pair This is a 12V system. All firmwares are up to date and the MultiPlus was thus reset and reconfigured usin…

That’s the old version. Switch off the unit an plug and unplug a normal 3,5mm “headphone” jack a few times.

The MultiPlus is otherwise visible by the GX: [Multi 1] [Multi 2] [Multi 3]

I have configured the MultiPlus voltage parameters using the Renogy data sheet as well as enabled and configured DVCC: [DVCC 1] [DVCC 2] [DVCC 3]

Check the current sensor (L): https://www.victronenergy.com/media/pg/MultiPlus-II_230V/en/appendix.html

[image] Matthias Lange - DE: Check the current sensor (L): Thanks for the quick response Matthias! My unit seems to have a barrel connector in place of the 3 position terminal block, am I crazy? [Actual Connections] I checked it against the specific manual, to be certain: [166e3f99739b5…

I did find that the datasheet PDF has an image that matches what I am seeing: [Screenshot 2024-11-09 at 12.49.13]

[image] Matthias Lange - DE: Switch off the unit an plug and unplug a normal 3,5mm “headphone” jack a few times. Wow. I don’t know what to say, but that worked. I didn’t have that size, but just sticking a smaller diameter plug into it loosely a couple times seems to have corrected the issue. …

[image] Adam: Should I be looking to warranty this unit anyway, just in case? No need to do that. Usually that only happens once and should be solved now. It’s a known issue and that’s why newer units have the 3-pole plug.

GX Not Showing AC Values When on Shore

DIY

system (system) Closed 23 November 2024 19:35 10

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Multiplus 24/3000/70 not showing incoming shore power correctly. Power assist not working

Topic		Replies	Views
Cerbo GX Monitoring Issues Q&A and troubleshooting diy , offgrid , parallel , multiplus-ii , cerbo-gx	2	179	5 May 2025
Multiplus II not showing AC in or ACLoad on Cerbo Q&A and troubleshooting beginner , multiplus-ii , cerbo-gx	1	43	22 October 2025
Unexpected Negative AC Power Value DIY multiplus , accuracy , cerbo-gx	12	508	19 November 2024
MultiPlus II not detecting or charging from 30A, 15A/20A shore, or generator DIY beginner , rv , vrm , multiplus-ii , cerbo-gx , split-phase	24	524	20 August 2025
Multiplus not reporting AC input or output when on shore power DIY victronconnect , diy , rv , vrm , multiplus-ii , mobility , cerbo-gx	1	208	26 February 2025

GX Not Showing AC Values When on Shore

Related topics