Grid connected solar not being used

Q&A and troubleshooting
, , ,
1

OK so it is working :grinning_face:

BUT now many questions

My grid connected Solar Edge Inverter is today {it is sunny in Scotland} producing energy I have an ET 112 connected looking at solar energy and VRM is showing that as positive energy. Previously it was showing this as negative energy and I swapped over the feed wires that it was measuring

VRM is showing positive energy BUT there is NO little blue line showing energy being transferred into the Multiplus II to run the house OR charge the batteries as the solar energy is seriously in excess of the AC loads.

Have I screwed this up by swapping over the leads on the ET 112?

2

WELL LOOKIE HERE

AC LOADS are now at ZERO and the inverter is NOW charging my batteries {as it is supposed to do}

BUT there is still no wee moving blue line from the PV Inverter to the Multiplus II

3

All answers are available on line for free. https://professional.victronenergy.com/

Follow / learn the basics and then what seems more expertise things will make more sense.