EVCS frozen screen with 2.01 and 2.00

Q&A and troubleshooting EVCS
, , ,
1

Hi All.

Updated 2 weeks ago my EVCS on the VRM site to 2.01.
First time the screen didn’t loaded the firmware correctly and had to reinstall 2.00 with “Victron Connect” app via bluetooth. After this everything looked was fine.

Got delivered my electric car 2 days ago and problems started again, screen got frozen, sometimes missing a button or does not respond to tactile. I have reboot it a couple of times but problems continues.

I guess it is a screen firmware problem as I can change settings and start or stop charging with VRM, Victron Connect and through a browser with the IP address.

Can someone give me another option how to reload suscesfully the screen firmware?

IMG_0771
IMG_07711920×1440 69.2 KB

2

I give myself a response:

some EVCS units, there are issues with the LCD functionality.
The reason for these issues is that some displays have a higher power consumption than initially measured.

Reducing the brightness of the screen to the minimum has solved the problem for the time being

Victron knows this problem and is sending me a driver number: SPR00103 that will power the screen from 2 sources