Hello everyone,
I have an installation consisting of:
- Multiplus II 48/10000
- MPPT 450/200
- 5 Pylonthec US5000 batteries
- Cerbo GX (firmware 3.81)
The Cerbo GX has a 32 GB SD card formatted as FAT32. I tested writing to the SD card to check that it wasn’t corrupted.
The production tile on the overview page never displays more than 2 bars.
The production history is only displayed for today and yesterday, never any further back, and the graph tab is also greyed out.
(The screenshots below show the different screens.)
I don’t know if you’ve encountered this kind of “issue” before, or if you have a solution?
Thanks in advance for your time.
Eric


