M2024
August 11, 2024, 11:51am
1
on my boat I notice that in GUI v2.0 it does not show my AC input from the AC meter.
in VRM it shows correctly the input which is set Shorepower:
but in GUI it shows as “Grid” and status “Disconnected”. screenshots in comment, as it does not allow multiple screenshots on single post.
mpvader
November 5, 2024, 6:05pm
4
Hey @M2024 ,
Yes thats a known issue. We’re working on a fix.
Best follow this thread:
As long as my Multiplus II 3 Phase system is on the Grid is shown nearly “correctly”. Since all my load is on the input side I would expect the AC Loads and my EVCS shown between Grid and Inverter
[Screenshot 2024-10-22 232531]
With Node Red I switch my Multiplus II to off, when my battery is on minimum SOC, my MPPT do not delivery enough solar and the Multiplus should not charge. This should minimize the standby power lose since I do not need the Multiplus when they should not charge or inv…
