question

abelisto avatar image

If I connect 3 smart solar MPPT to CerboGX using the VE.direct cable, will there be coordinated charging of my managed lithium battery with BMS connected to the CAN Bus?

mppt smart solar
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Abelisto

This is not something I have tried personally or even seen, but in theory if they are Victron supported CAN batteries (https://www.victronenergy.com/live/battery_compatibility:start) with DVCC switched on then the batteries could control the MPPT charging algorithm.

https://www.victronenergy.com/media/pg/CCGX/en/dvcc---distributed-voltage-and-current-control.html

At least that is how I understand the linked article.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.