question

Anders avatar image
Anders asked

The new Node red Dashbord 2.0 - "Cannot GET /dashboard" error

I have installed the new Dashbord 2.0 and restarted Node Red
This gives me the new meny - but the Dashbord only answer "Cannot GET /dashboard" error "
1709153662906.png
I assume I have to "populate the New Dashbord but haven't found how to do this - anyone else experiencing the sam, and maybe have found the solution ?

Node-REDdashboard
1709153662906.png (63.0 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Dirk-Jan Faber (Victron Energy) avatar image Dirk-Jan Faber (Victron Energy) ♦ commented ·
The tiles in VRM will show as soon as the dashboard2 is installed via the palette manager, it does not check if it is actually used and deployed yet in a flow.
0 Likes 0 ·
2 Answers
nickdb avatar image
nickdb answered ·

This is beyond Victron's scope. I have it running, just following the getting started guide from the git/nodered page will get you working. There is a fair amount of setup required and if you miss a step it will not work.

It is very new still, and it's integration into the stack is underway, but it is way too early still.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Anders avatar image
Anders answered ·

It was easy - Just started to use the New nodes displayed under the new Nodes Dashboard 2
1709156979992.png

A bit fiddling with Group setup - thats all......
1709157048596.png


The New Dashboard looks fresh!

1709156950057.png


1709156950057.png (35.0 KiB)
1709156979992.png (17.8 KiB)
1709157048596.png (17.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.