dbus-driver: Expected value L1,L2,L3 Energy

Question

question

dutchsolarfreak asked Dec 5, '23

Hello

I am writing my own dbus-driver for reading my P1 smartmeter and I was wondering what values does Victron expect here:

For now I send the total imported per phase

Could someone post some screenshots from their energy meters or explain what values to expect here?

Totals per phase or energy per phase per day?

cerbo gx Energy Meter Modbus TCP driver

schermafbeelding-2023-12-05-092449.png (55.0 KiB)

schermafbeelding-2023-12-05-093338.png (41.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-12-21T13:09:30Z

dutchsolarfreak answered · Dec 21, 2023 at 01:09 PM

Hello

Could someone post some GUI screenshots from their (3 phase) Victron energy grid meters?

I would like to know what is presented in the Energy L1..L3 fields.

Is this Energy per phase/day or Energy per phase/total

Thanks

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-12-21T22:46:10Z

Mr.Orange answered · Dec 21, 2023 at 10:46 PM

This is from the new Victron Energy Meter VM-3P75CT:

1703198708096.png (18.2 KiB)

1703198742467.png (14.8 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2023-12-21T22:47:50Z

Mr.Orange answered · Dec 21, 2023 at 10:47 PM

Carlo Gavazzi EM530 Via RS485 USB adapter.

1703198843851.png (17.0 KiB)

1703198862303.png (16.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.