question

permariusteigen avatar image
permariusteigen asked

Generator Node

screenshot-2022-09-18-093438.pngge.jpgHi


This is in Autostart mode.

When I set up a node to find out why gen starts (Condition that startet the gen), I only get to report the number 1, manual.


Does anyone else use this for something, get a different status?

In the picture it started on SOC but it does not come up.


update:I see it at first, but then it disappears very quickly.

update2: Since it is in manual, it looks like it does not stop as it should


(the tank gauge is not connected yet)


With best regards

Per-Marius


https://vrm.victronenergy.com/installation/18889/share/90968aa1

GeneratorNode-REDgenerator auto start
ge.jpg (1.4 MiB)
screenshot-2022-09-18-093438.png (20.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
permariusteigen avatar image
permariusteigen answered ·

I may have found the problem with the help of some tips on Facebook. Node-Red which sneaks in a signal as a mauel when relay 1 is switched on. Will try with the next opportunity, then I will update so others don't end up in the same situation. :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.