the relay of my GlobalLink 520 i can activate via VRM Portal.
Is it possible to activate this relay automatically?
Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.
No this is not possible at the moment. I will add it to the feature requests.
Has there been an update on this topic?My power supply setup for my trail camera is based on a SmartSolar Charger MPPT 75/10 and a GlobalLink 520.
As soon as the power consumption exceeds about 200 mA, I know that the camera is active.
Based on these triggers, I like to power up a mobile router that enables the image upload from the camera to my FTP server.As long as there is no activity, the mobile router should be turned off as energy saving is extremely important outdoors.
The below pictures show how the system 'breathes' through the days. If a mobile router is constantly turned on, the uptime of the camera trap system would be negatively affected.
29 People are following this question.
Globallink 520 Multi Rs Solar Dashboard
VRM alarm rule with multiple parameters «and»
Self consumption global link smart solar and bmv shunt
Global link 520 and MPPT not connecting
GlobalLink 520 in VRM Portal but not in the Victronconnect App