question

David avatar image
David asked

GlobalLink 550 Time Zone

Setup went well but the 'Local Time' is actually GMT. Have looked through manuals but can't find where to change to Australian EST. Thoughts?

globallink
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
shaneyake avatar image
shaneyake answered ·

You can set the location in VRM, that will fix the timezone.
Settings -> Set Location

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

keith-yzquierdo avatar image
keith-yzquierdo answered ·

I have found that my location setting doesn't stick on the first try. Once I'm in "set location", I often need to click "reset", and then reenter the location and click "save". Then I go back and check the local time on the dashboard, and if it hasn't updated then I go through those steps again. Sometimes it works on the first try, but others require multiple resets. I haven't had to do more than 5 resets, but it frequently takes more than 2 before it sticks.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.