Maximum Amps - 100/20 smart controller

Question

question

solarbuddy asked May 29, '21

I presume that if I attach more than 20 amps solar panels the Mppt will just limit the output to 20A without damage to the device?

MPPT SmartSolar

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-05-30T04:04:32Z

Paul B answered · May 30, 2021 at 04:04 AM

this is correct. but do not go over the max Open circuit voltage setting

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-05-30T04:07:03Z

gro answered · May 30, 2021 at 04:07 AM

20A is the limit on the charger output.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2021-05-30T06:39:44Z

solarbuddy answered · May 30, 2021 at 06:39 AM

Thanks guys!

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.