question

uguraladag avatar image
uguraladag asked

Can I use victron mppt charger with different brand mppt charger?

Will I have a problem if I connect 3 pcs Victron mppt 100/30 chargers with the same set values connected in parallel to the battery main busbar and another brand mppt charger 100/40 with the same set values to the battery main busbar in parallel?

And is the wattage produced by 100/40 other brand mppt included in the total generated solar power shown on the VRM control panel?


MPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

Yes you can as long as it has it's own set of panels. The non Victron unit will not be reported in VRM unless there is a BMV or smart shunt (connected to the GX ) measuring the flow to and from the battery. And then it will be a part of the total, not reported separately.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

uguraladag avatar image
uguraladag answered ·

Thank you ,very much kevgermany

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.