Hello it’s my first post here, but i’m a bit of a lurker that have digged a bit around the subject before. First of, i own a decent little installation based on Victron solutions, (except my two LiFePo Batteries) to power my 4x4 RV. 2x Ultimatron 12v 200Ah in // Mutiplus II - 12/3000/120 MPPT 100…

I have a “Waveshare RS485/CAN-Hat (B)” on a Pi 4, which I use to connect to my JK-BMSes via RS485. I bought it because the CAN and RS485 are isolated (from the Pi, not from each other), it could also power the Pi from up to 28V, but I’m not using that with my 48V system…

Nice and cheap, that allow you to work around with CAN bus. But still a bit too less function for me.

Hello, good initiative, as said upper, an RTC clock and a 12-24vdc input SMPS would be nice. I already own this product from DuPPa for the VE.Direct communication with my Victron’s devices. ADC analog tank sensor that work out of the box would also be a massive improvement.

VenusOS 3.52+ on Raspberry PI (3B+) and extension HAT(s) solutions?

Modifications

adamkirby (Adam) 2 January 2025 06:13 3

check out Venus os pi hat

1 Like

Topic		Replies	Views
Nkon Ess -> Venus Os Deutschsprachiger Bereich	20	417	2 February 2026
Multiplus II charge commander on Raspberry PI DIY venus_os , multiplus-ii , raspberry_pi	6	92	22 February 2026
Is it possible to connect my venus OS/raspberry pi to steca tarom4545 using UART DIY diy , venus_os , raspberry_pi	3	86	3 June 2025
Verkabelung mit raspberry pi Deutschsprachiger Bereich	7	1630	7 March 2025
Venus OS für Rapsberry Pi5 / Orange PI5 Deutschsprachiger Bereich venus_os	5	2397	13 January 2025

VenusOS 3.52+ on Raspberry PI (3B+) and extension HAT(s) solutions?

Related topics