Good day! A fresh thread for v3.70 beta feedback. If you haven’t seen them yet, make sure to go through the v3.60 slides: public - Venus OS v3.60 Release - Google Slides . Change log below, and first please make yourself aware with the beta testing instructions: Instructions 1 of 3: Venus OS bet…

Hi I have a strange behaviour with a virtual switch, it only affects the momentary switch: When I click on it with my mouse, the switch seems to react and change to “On”, but monitoring it on dbus-spy the state does not change from 0 to 1… If I press the virtual switch with the space bar it works…

Hi Matthijs, I downgraded to 3.67 like you suggested and it works exactly the same as the latest 3.70 beta. The individual phase currents limit is incorrectly applied, such that all phases total amps is limited to the set value.

Happy New Year. Can we get an update that lets us either lower the Ruuvi low battery alert threshold to 2.3 V or disable the low battery notifications entirely. The current 2.5 V threshold triggers false alerts during brief cold mornings, and also on devices sitting near industrial refrigeration, …

Happy New Year :slight_smile: I could be totally wrong here, but I have a vague memory that the low battery alarms of the Ruuvi’s are sent by the Ruuvi’s themselves (at a hardcoded treshold) and not generated locally by the GX device. Hence it is more annoying to change these alarms. As stated: I…

Can someone tell me how the Virtual Load works? I added 2 virtual loads and it is visible in the console although stated as disconnected, but I don’t see it in VRM. [image] What does the virtual device AC Load do? Q&A and troubleshooting I added our dishwasher…

This should get you going. Uncomment the necessary fields for a 3 phase load. [{"id":"e4a02e8dd8f25f92","type":"victron-virtual","z":"9f95e47b9a8d70a1","name":"","outputs":1,"device":"acload","default_values":false,"acload_nrofphases":1,"enable_s2support":false,"battery_capacity":25,"include_batte…

sorry for the OT Question, but how to copy / edit / test this node red flow? Using Chrome, maybe the problem?

I created the flow in my Node Red, selected the nodes I wanted to copy. Right click, Export, copy to clipboard, then pasted the resulting code here in a “Node Red flow” section. To use it you can click the button to copy the code to your clipboard. Then you go to your Node Red page, right click, …

i´m to stupid - which button to copy it to the clipboard? [image]

Bottom right in the Node Red window. Might be hard to see in your dark view. [image]

Venus OS v3.70~61 available for public testing

Beta testing Venus OS beta testing

jeroen (Jeroen) Split this topic 18 February 2026 21:03 297

A post was merged into an existing topic: Venus-os-v3-70-91 Node-red not working

Topic		Replies	Views
V3.64 Node-RED - Not connected to D-Bus error Node-RED diy , domestic , node-red , gx_device , cerbo-gx	48	1122	24 October 2025
Shelly 3PM einbinden Deutschsprachiger Bereich vrm , cerbo-gx	78	2921	8 April 2026
Where is Node-Red gone in Venus 3.60? Node-RED diy , domestic , gx_device	81	1287	3 July 2025
Paging all DESSies: Who wants to actively participate in a community DESS fork effort? DESS diy , dess , node-red , victron_community	40	730	21 November 2025
Hinweis Upgrade von 3.67 auf 3.70 mit Node-Red Virt Grid Meter Regelung setzt aus Deutschsprachiger Bereich vrm	24	199	29 March 2026

Venus OS v3.70~61 available for public testing

Related topics