Variable peak shaving and Dynamic ESS

Q&A and troubleshooting DESS
, , , , ,
1

Hey,

I have a MP-II 5k with 5kw Fronius and multiple MPPT as well as a 14kWh battery. I use dynamic ESS and configured the max grid input and export power in VRM as well as peak shaving to 14A/3kW in the ESS settings.

The installation is in Spain and uses the variable tariff with two distinct maximum grid power settings. The configured 3kW is valid during the day. But during nights/weekends/holidays the max value is 4kW.

Question is now if there is a way to configure the DESS values as well as the peak shaving limit differently? Similar to the buy/sell prices that also allow to define hourly prices.

Thanks

Andi

2

Apologies, I see that there are multiple other threads on the topic, e.g. How to configure grid power according to time ranges

However, non of them seems to have a solution that can be configured directly over the settings. Is Victron planning to provide support for it in the stock firmware?