Please, what is the actual problem with our Victron 15KVA inverter? Each time the inverter goes off, it cannot be restarted unless we first remove the VE.Bus data cable from the Color Control GX (CCGX). Once the cable is disconnected, we can then restart the system. We’ve already updated the CCGX …

I have exactly the same problem with my Multiplus. It used to work fine, then stopped switching on with the VE.Bus cable connected to the GX device. I hope someone has the answer on here! Thanks…

Is the Cerbo powered from AC with an adapter?

No please, the CCGX is powered from the DC Batteries Busbar

It’s just the most obvious reason the inverter would not boot, so I had to ask. :slight_smile: The CCGX is operating normally with the inverter off? Why is the inverter shutdown? Intentionally or due to low SOC? Can you tell us more about your system? On your CCGX the inverter switch is set to ON? …

I have a very similar issue: My MultiPlus-II was working fine with the GX device connected via VE.Bus for 5 years. Then one day it would not switch on unless the VE.Bus connection was unplugged, then I could replug it and everything is fine. I since replaced my Venus GX with a Cerbo GX but the same…

@Skipper , sometimes when you turn off the inverter and try to restart it, it won’t start unless you first remove the VE.Bus data cable."

[image] Skipper: The CCGX is operating normally with the inverter off? Why is the inverter shutdown? Intentionally or due to low SOC? Can you tell us more about your system? On your CCGX the inverter switch is set to ON? The CCGX is operating normally with the inverter off? Why is the invert…

I cannot speak for @Augustine1992 , but my inverter is shut down overnight when I am off grid on my boat.

@Skipper Yes, the CCGX works well when Inverter is OFF. Once a while the inverter shutdown due to batteries low or overload.

Not sure what could cause this. This other topic seems to have a similar issue: [image] Multiplus-II inverter not switching On with VE.Bus cable to Cerbo GX Connected DIY What is the actual version on the inverter

So, I tried powering the Cerbo from other cables coming from the battery in case of some slight voltage drop vs the feed to the Multiplus; it made no difference. I read in the Cerbo Manual FAQs (19.2.20 Q20) that when using other power sources than the battery you can remove pin 7 from the VE.Bus c…

Urgent Issue with Victron 15KVA Inverter and VE.Bus Communication

DIY

Skipper 1 May 2025 14:19 11

Not sure what could cause this. This other topic seems to have a similar issue:

Topic		Replies	Views
Persistent Issue with Quattro Inverter not switching on Q&A and troubleshooting expert , quattro	14	362	12 August 2025
Multiplus-II inverter not switching On with VE.Bus cable to Cerbo GX Connected DIY diy , multiplus , offgrid , multiplus-ii , cerbo_gx	27	1062	13 January 2026
Cerbo GX MK2 - Will not turn Inverter back on DIY diy , gx_device , cerbo_gx	40	646	13 January 2026
Multiplus2 will not turn on when connected to ve bus on cerbo DIY beginner , offgrid , domestic	5	899	23 April 2025
Multiplus 2 shutting down when connected to cerbo gx mk2 DIY beginner , campervan , multiplus-ii , cerbo_gx	7	321	2 August 2025

Urgent Issue with Victron 15KVA Inverter and VE.Bus Communication

Related topics