Multiplus-II 48/15000/200-100 230V connected via VE.Bus to Cerbo GX does not switch ON either from the Cerbo GX or the inverter switch once powered down. It can only switch ON once the VE.Bus cable is disconnected. However, it can properly switch off either from the Cerbo GX or inverter switch wit…

Hi, just confirm that the GX is on 3.54 not a beta version? Thanks

Hello, Yes. The GX is running the version 3.54 and not beta. venus-swu-einstein-20250128120635-v3.54

Thanks, and you confirmed on the GX that in the inverter tab, the soft switch was not set to OFF? This is about the third recent post I have seen. What batteries are you using? Are you able to reproduce it? If so, can you try the redetect vebus system option in the GX device settings.

[image] Theophilus Ananias : Multiplus-II 48/15000/200-100 230V What is the actual version on the inverter

You are welcome. Confirmed, the soft switch in the GX device was set to ON and it goes to OFF when the inverter is off. I have also tested that I can switch the inverter off from the GX device by toggling the soft switch but switching ON fails. I have 6 x Dyness DL5.0C battery connected to the GX …

Thanks, that helps. So is this reproducible then for you?

Hello, I will get you this information soonest.

Hello Nick, No, it is not reproducible at the moment. I do not have another device to test it on. I am planning to visit the distributor in a few week to see if this issue exist on other devices or perhaps just this ones. I will do that and update on the findings

Thanks. It has been difficult to help as the issue seems to resolve after the initial install.

Hello LX, The inverter is running firmware version v556 currently.

Multiplus-II inverter not switching On with VE.Bus cable to Cerbo GX Connected

DIY

lxonline (LX) 25 March 2025 06:02 5

What is the actual version on the inverter

Urgent Issue with Victron 15KVA Inverter and VE.Bus Communication

Topic		Replies	Views
Multiplus II not turning on remotely via touch50 and cerbo gx Q&A and troubleshooting diy , multiplus_2_gx , multiplus-ii , cerbo_gx	10	310	12 February 2026
Multiplus2 will not turn on when connected to ve bus on cerbo DIY beginner , offgrid , domestic	5	936	23 April 2025
Multiplus 2 shutting down when connected to cerbo gx mk2 DIY beginner , campervan , multiplus-ii , cerbo_gx	7	371	2 August 2025
[Solved] Multiplus stops as soon as Cerbo GX is connected DIY multiplus , vrm , gx_device , cerbo_gx	3	401	30 July 2025
MultiPlus II often doesn't turn on on the first attempt via Cerbo GX (Touch or VRM) DIY expert , vrm , multiplus-ii , cerbo_gx , cerbo-gx	3	86	1 September 2026

Multiplus-II inverter not switching On with VE.Bus cable to Cerbo GX Connected

Related topics