When I switch on the new GUI on the display on my Ekrano, the Ekrano performs an unexpected reboot several times a day.
If the Ekrano (display) is set to the old Guy, the reboots do not happen.
I have tested the latest firmware 3.60 build 15. After about 1.5 days, an unexpected reboot was performed. During this reboot, the connection to the Smart Shunt was also not re-established. A manual reboot brought no improvement. I therefore switched back to the old firmware 3.53 build 2. Now the Ekrano started up again without any problems and the Smart Shunt was back.
I have updated to version 3.60 build 16 and after a reboot the smart shunt was still there. I will report back …