The display is still lit

[Miso_Grno]

After updating to v2.02 the backlight never turns off - check my settings. At night even backlight 10 is too bright, the display should turn off completely during inactivity. Yes, the solution is to completely disconnect EVCS… Can this be achieved in a more subtle way in the settings?

[Miso_Grno]

it looks like this:

[Miso_Grno]

I don’t understand the ignoring. Idle backlight should logically have the option to set the value to zero. Ten doesn’t make sense, it’s wrong. Fixing the firmware only in the user interface took less than five minutes. Please, add version 2.03. Thank you.