Running my Cerbo GX MK2 on v3.72 and having some spare time I started to do some tests with my Shelly’s.
I have a boiler on my 1PM gen2 running v1.75 and a heatpump metered via a 3EM-63 gen3 also running 1.75 added to my Cerbo.
So far so good I enabled them and see the measurements perfectly fine on my Cerbo screen in settings–>Devices–Shelly Boiler (and Headpump).
I am also able to add them to my VRM environment as graphs.
So far so good.
I would also like to add them as to my VRM dashboard (so in this view as a named AC load)
And in my Cerbo Screen (also as a named AC load)
But there is no mentioning about this in the Webinar nor can I find anything usefull (other than complete homebrewed virtual devices which I do not prefer) to add them to these screens.
So just wondering if I completely missed some documentation or this is just not available (what would be a pitty if you asked me).
Hope someone can point me in the right direction.
@nickdb Just curious why you moved this question to DIY,
I am an installer so this is a question from a “pro” not so much from a DIY perspective.
This is about main supported functionality (as I understood from all the e mails I received from our friends of Victron Sales department so no such thing as DIY from my perspective).