Shelly as PV meter (single phase) for Cerbo GX, problem

Hello,

I still try to use a shelly Outdoor PlugS Gen3 as Power Meter for an micro inverter.

On the shelly Webserver I see for example “-300 W” = ok

shelly settings,

  • (Input/Output settings - Action on power on for Output (0) - Turn ON)
  • Wifi: connect to Cerbo AP
  • Outbound websocket: “ws://172.24.24.1:8000” or “ws://venus.local:8000”
  • … for later use, (with Network, NTP connection):
    (- Schedules - At sunset - Output (0) - off) to save PV inverter night standby consumption
    (- Schedules - At sunrise - Output (0) - on) to switch on PV inverter at daytime

Cerbo GX
Solar yield Box is now shown on the Cerbo Brief and Overview :slight_smile: ,
but no values “-- W” :frowning:

  • Settings - Devices - Shelly energy meter - “AC totals: 0W” = :frowning:
  • Settings - Devices - Shelly energy meter - Role: PV inverter
  • Settings - Devices - Shelly energy meter - Position: AC Input 1
    (further more I still don´t find a option to set the shelly PM position to L1; L2 or L3)

Hardware setting:

  • grid supplyer 3-phase power meter
  • Victron VM-3P75CT power meter (fw. 1.8)
  • Cerbo GX (fw. 3.55 and 3.60~86)
  • 3-phase home grid, RCDs, fuses, power sockets, …
  • micro PV inverter (connect to L3)
  • shelly Outdoor PlugS Gen3 (fw 1.2.3 and 1.7.0-beta1) and shelly 1PM Gen4 (fw 1.6.2)

I still try classic UI and new UI.
Solar yield “-- W”

How can I get the shelly PV measurement figures on the cerbo display?

Hi @pv-bauer ,

Have you watched the following video by Andy at @OffGridGarageAustralia on Youtube:

This may be what you need to know?