1. Introduction This procedure and software will turn an Android tablet/phone into a dedicated display for GX products. The app, once installed, takes over the device, running in kiosk mode to ensure it functions as a dedicated display for GX devices. This means: The tablet will only serve as a GX…

Hi, many tests on this post with first’s price tablets (< 100€). Result are OK. I use to have old TAB A with Android 7.71 and it work good ! Samsung, Lenovo, Huawei… Xabi

I have used the Samsung Galaxy Tab A9 several times and it works great. Its 8.7" and $102 on Amazon.

[image] Neil Citro: Samsung Galaxy Tab A9 Confirm :slightly_smiling_face: Excellent quality and display size for a reasonable price. [Update: 18.06.2025]: Running now for multiple weeks, no issues at all. Maybe just one “cosmetic” finding: After wakeup, it shows the last information before …

Same here: Galaxy Tab A9. Appmode (not kiosk). Currently testing with simcard + Tailscale + AirDroid / AirMirror. Not sure yet about the AirDroid part for commercial reasons (will explore other free open source options) but looking good so far for remote monitoring E-boat system (VictronConnect Ap…

Hello. I’m using a Android 6.0 phone, QR code install does not work, but the GX app does after a .apk manual install. What you can try : Turn WiFi OFF (keep pushing more that 5 secs on bottom left of the screen, then …) Assign manually the IP address of the GX device Turn WiFi ON I think that A…

In the picture above why are there 3 bars in the chart to the left of 709 W? Is this a feature I do not understand or a bug? You won’t see the 3 bars when the GUI is reloaded and after some time the additional 2 bars will appear again. For my Victron system I have never seen these phantom bars in t…

A few nice comments from the Youtube channel video for this feature :slight_smile: [CleanShot 2025-06-13 at 14.12.29]

Great stuf, I just set it up on a Samsung Tab A6 SM-T580. Worked first time, very good. I can’t get the service menu to open.

Good morning, Checked today Motorola g34, V1 is installed and runs just fine. Was before beta8. No issues anymore. Regards, Jeroen.

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Beta testing Venus OS beta testing

Topic		Replies	Views
Show us your Android GX WI-FI display installed Show us your system cerbo_gx , android-gx-display	31	3811	26 July 2026
Which Android tablet or phone should I use for the wifi GX display feature? Q&A and troubleshooting cerbo_gx , android-gx-display	21	2294	2 August 2026
Display Off Time non-Victron touch screen DIY diy , gx_device , victron_community , cerbo_gx	7	1187	6 May 2025
App Victron Connect not working / Victron Connect App funktioniert nicht Q&A and troubleshooting victronconnect , diy , vrm , multiplus-ii	41	648	14 October 2025
Android GX Display keeps rebooting DIY diy , display , android-gx-display	4	229	16 July 2026

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Related topics