1. Introduction This procedure and software will turn an Android tablet/phone into a dedicated display for GX products. The app, once installed, takes over the device, running in kiosk mode to ensure it functions as a dedicated display for GX devices. This means: The tablet will only serve as a GX…

It may be realated but neither does the fronius on gui v2.

Hi everyone, As many of you have probably noticed, Android GX Display has been officially launched. Thank you all for your feedback, it’s been tremendously valuable in getting us to this point. A few issues are still open and will be addressed in upcoming releases. [Convert an Android ta…

Is there a list of tablets confirmed to work with the app? I lost overview in the thread.

I installed v.1.00 right after release. But it still runs into Reload/Restart screen once a day. After last restart a message was coming up: “Beim Parsen des Pakets ist ein Fehler aufgetreten.” (“An error occurred while parsing the package”). But it comes back to work after confirming this message.

Up and running on a new (cheap) Packard Bell Monza T5 7-Inch tablet running Android 13 (installed from QR). :smiling_face_with_sunglasses: The tablet is set to switch off the display after 2 minutes of inactivity in Android settings. This works, but it seems the only way to wake the tablet again i…

Most of time (but not always) I get “Transport Connection Error” when waking the device by power button or when returning from the settings menu. gxDisplay does connect and return to normal working after a second or two though.

likely because the unit goes to sleep, and so does the network connection.

…does the Release-Version also has an option to be installed via APK and not QR method? I did not see a link provided in the announcement

Yes, it is the same limk. https://ve3.nl/gxDisplay You can also find it in the manual, first link in the video description.

Just tried a factory reset again and the QR method which still doesn’t work with v1.00 Tablet is a cheap brand from Amazon : C11 running Aumi OS 2.5 (BigdroidOS 3.0.1.011800) Android 14 Venus Beta v3.60~71 APK install does work though. Is this an OS limit that Victron can’t get around?

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Beta testing Venus OS beta testing

Topic		Replies	Views
Show us your Android GX WI-FI display installed Show us your system cerbo_gx , android-gx-display	31	4019	26 July 2026
Which Android tablet or phone should I use for the wifi GX display feature? Q&A and troubleshooting cerbo_gx , android-gx-display	21	2493	2 August 2026
Android GX Display v1.2 released DIY diy , gx_device , android-gx-display	9	472	1 October 2026
Display Off Time non-Victron touch screen DIY diy , gx_device , victron_community , cerbo_gx	7	1250	6 May 2025
App Victron Connect not working / Victron Connect App funktioniert nicht Q&A and troubleshooting victronconnect , diy , vrm , multiplus-ii	41	781	14 October 2025

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Related topics