Anywhere in the V2 dashboard I saw the setup to disable the charger. Unfortunately I cannot find this setup again.
Similar to the 3 position HW switch of the Multi with the position “Charger only” it should be the position “inverter only”.
With other words: Only negative values for grid feed in are allowed.
Tap on the screen to get the icons, then click on the top left icon. Then on the pop out screen click on inverter/ charger mode.
Ok, found. I have to click to the Mode ON Button what means both inverter and charger enabled.
The V1 equivalent is here
Anyway, as soon as the switch is not ON and inverter only, the Multi is further in inverting state but ESS grid setpoint seems no more accepted and no grid feed in happens.
Edit:
Is working. The grid protection triggered for any reason while playing around from remote location. Therefore it was really no grid available to feed in.
