MPPT RS only shows two days worth of history on GX device, full history in VictronConnect

[Jalle19]

For anyone else reading this, see these other threads:

SmartSolar MPPT VE.VAN 150/70 rev2 daily history nur zwei Tage

Hallo Zusammen, mein neuer SmartSolar 150/70 zeigt bei “Daily history” in der Konsole nur zwei Tage an (Heute und Gestern, seit 2 Wochen in Betrieb). Meine 150/35er zeigen da mindestens die letzten 30 Tage an! Firmware v3.15, angeschlossen an Cerbo GX per VE-CAN. Per Bluetooth mit der App sind 14 Tage Historie sichtbar. Der Cerbo läuft seit Ende 2023 (oder so) mit Version v3.31~3 und klassischer UI. Hilft es, wenn ich da ein Update mache?

v3.50~13 GUIv2 MPPT History Incomplete

I’m running 3.50~13 with GUIv2. I went to check my MPPT 250/85 history. It has today, yesterday, but for 7 day and 30 day it is the same as yesterday. I also have a 100/50 and it is correct. I’m running v3.16 firmware on the 250/85. I have attached screen shot. [Today] [30 Day] [7 Day] [Yesterday]

Solar Yield Graph Not Working

I have the same issue with V3.54. I’m in contact with a Victron technician concerning this issue. The diagram should show the yield of the last 10 (small display) or 13 (big display) days inclusive today with the most recent bar on the left. However, this is not working properly. In my case it happens that the diagram ist not updated for days or even for weeks and thus shows old data. That happen even the most recent data is available. When I tap on the display and go to Solar Yield > History > …

GUI v2 bug in history for MPPT 250/100 CAN

FWIK, the VE.Can devices will publish by default on the bus only Today and Yesterday history values. Not that the VE.Can devices doesn’t have them inside, but only the last two days are read by the VE.Can driver. The others, VE.Direct ones, will have available the entire last month. Maybe in the future this will change, or who knows maybe I am wrong and they are already read… Nevertheless, the speed and way the CAN communication works, it’s no problem to read all 30 days for as much as 25 de…

Bluesolar MPPT 250/70 Ve.can history

I have a mppt 250/70 ve.can connected to a cerbo gx, and via the VRM app it is not possible to see a history beyond “yesterday”. When I open VictronConnect, select my cerbo(vrm), connected devices, and then this mppt, I do get data beyond yesterday. My other mppt connected via ve.bus does show the history in both apps. Is there a setting, or logical reason why it is not visible via the VRM app? [Screenshot_20241112160548] [Screenshot_20241112160616] [Screenshot_20241112160652] Hopefully …

Maybe it’s time to mention this in the manual?